Pickering Electronics Blog

An introduction to Reed Relay basics (Part 2): The Configurations

Posted by Graham Dale on Mar 24, 2015 12:30:00 PM


Normally Closed Reeds


Normally open reed relays are by far the most common configuration of reed relay. However, normally closed relays can also be supplied where the blade is biased so it is normally closed and the application of a magnetic field opens the relay contacts.

The contact bias is created by adding an internal permanent magnet to hold the reed switch in a normally closed state. When the relay coil is energised it cancels out the magnetic field bias and the contacts open. If the coil voltage is increased substantially beyond its nominal voltage (typically greater than 1.5 times nominal) there is a risk that the contact will reclose.

Not surprisingly normally closed relays are more difficult to manufacture and have higher magnetic interaction due to the bias magnet.

Read More

Topics: Reed Switch, Two Pole Relays, Changeover Reed, Normally Closed Relay